Filter
Top Products
Special media for printing
This MFP supports printing on special media.
For tray, media orientation, and driver settings, see
Print on special media.
For instructions on loading envelopes, see
Load tray 1 (single-sheet feed tray) or Load tray 2.
Envelopes
●
Store envelopes flat.
●
Envelopes should not be wrinkled, nicked, stuck together, or otherwise damaged. Do not use
envelopes that have clasps, snaps, windows, coated linings, self-stick adhesives, or other synthetic
materials.
●
Only use envelopes where the seam extends all the way to the corner of the envelope as indicated
in the following illustration.
1 Acceptable
2 Unacceptable
●
Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use
adhesives that are compatible with the heat and pressure in the fuser.
CAUTION Failure to follow the guidelines above can result in jams.
Labels
When selecting labels, consider the quality of each component:
●
For tray, media orientation, and driver settings, see
Print on special media.
●
Only use labels with no exposed backing between them.
●
Labels must lie flat.
●
Do not use labels that have wrinkles, bubbles, or are damaged.
●
Use only full sheets of labels; this MFP does not support print partial sheets of labels.
●
Use only labels specified for use with HP Color LaserJet printers.
ENWW Special media for printing 15