HP (Hewlett-Packard) NC110T Network Card User Manual


  Open as PDF
of 7
 
The HP NC110T is a cost-effective Gigabit Ethernet server adapter that features single-port, copper, single lane (x1) PCI Express
capability, with 48KB onboard memory that provides 10/100/1000T auto-negotiated speed and duplex. Designed with ProLiant
server needs in mind, it offers these server features: Cold boot Wake-on-LAN (WOL), PXE, Jumbo Frames (9K), Large Send Offload
(LSO), TCP Checksum Offload, and includes brackets for both half (low profile) and full height server slots so that customers have
maximum flexibility using this server adapter with their ProLiant server.
The NC110T is based on the Intel 82572GI controller and supports these IEEE standards: 802.3, 802.3u, 802.3ad, and 802.3ab,
802.1x, 802.1Q and 802.1p. Validated by HP so that it meets the highest ProLiant standards and provides a seamless, network
solution that is integrated with HP SmartStart, Insight Manager, networking software, firmware, and agents. NIC teaming drivers are
available for all major operating systems along with teaming utilities, multiple VLAN tagging, and a configuration GUI.
Models
ModelsModels
Models
HP NC110T PCI Express Gigabit Server Adapter
434905-B21
Kit Contents
Kit ContentsKit Contents
Kit Contents
The option kit contents consist of the following items:
HP NC110T PCI Express Gigabit Server Adapter PCA ships with a standard height bracket
attached to it. (The low profile bracket is included in the clamshell that the PCA ships in.)
Product Warranty statement and the Quick Install Card (QIC).
CD containing Drivers, User Guide, Installation and Diagnostic Utilities, and User Guide (English
only).
QuickSpecs
HP NC110T PCI Express Gigabit Server Adapter
HP NC110T PCI Express Gigabit Server AdapterHP NC110T PCI Express Gigabit Server Adapter
HP NC110T PCI Express Gigabit Server Adapter
Overview
DA - 12664 Canada — Version 1 — February 12, 2007
Page 1
next