HP (Hewlett-Packard) T5745 Laptop User Manual


  Open as PDF
of 2
 
HP t5745 Thin
Client SATA 16 GB
Support
Table of Contents:
Introduction ........................................................................................................ 1
Procedure ........................................................................................................... 1
Introduction
This document will show a user detailed instructions on how to configure the HP
t5745 Thin Client for SATA 16 GB Support.
Pre-requisite: Ensure that NO external storage device is connected to the thin client
after the SATA DOM is installed.
Procedure
1. Boot up the HP t5745 Thin Client to the HP ThinPro Control Center.
2. Switch to Admin Mode in order to access X-Terminal. There are two ways to do
this:
Right-click the cursor outside of the HP ThinPro Control Center and select
Administrator/User Mode Switch. A Switch to Admin Mode dialog box
appears. Type root in the administrator password field, and then click
OK. The HP ThinPro Control Center (Administrative Mode) page appears.
Or
In the bottom left corner of the screen, click on the HP logo and select
Administrator/User Mode Switch. A Switch to Admin Mode dialog box
appears. Type root in the administrator password field, and then click
OK. The HP ThinPro Control Center (Administrative Mode) page appears.
3. Click Control Panel in the left pane of the ThinPro Control Center
(Administrative Mode). Select the Advanced tab in the right pane. Double-click
the X Terminal icon to open it.