Filter
Top Products
23
3. Using the Live Mode
3.2 Install “Live Viewer 3”
In order to use the Live Mode and Quick connection, you need to install the
enclosed software, the “Live Viewer 3”, into all PCs that you want to connect to
the projector through the network.
3.2.1 Minimum PC hardware and software requirement
• OS: Windows 2000 Professional (Service Pack4)
Windows XP Home Edition
Windows XP Professional
Windows Vista Home Basic (32bit)
Windows Vista Home Premium (32bit)
Windows Vista Business (32bit)
Windows Vista Enterprise (32bit)
Windows Vista Ultimate (32bit)
• Graphic Interface: Video RAM 4MB or higher (8MB recommended)
• CPU: Pentium III (600MHz or higher recommended)
• Display: VGA 640x480 or higher (XGA 1024x768 recommended)
65,536 simultaneous colors or higher
• Memory: 64MB or higher (128MB or higher if using
Windows XP)
• Available Hard Disk Space: 20MB or higher
• Web browser: Internet Explorer® (5.5 or higher)
• CD-ROM drive
• Wireless: IEEE802.11b/g
NOTE
• Depending on the type of wireless network device and PC you are
using, the projector may not be able to communicate properly with your PC,
even if the PC you are using is equipped with built-in wireless LAN functionality.
If the communication problems occur, please use a Wi-Fi certied wireless
network device.
NOTE
• For Windows VISTA, use the latest “Live Viewer 3”. Please get the
latest version at Hitachi WEB site (http://hitachi.us/digitalmedia or http://www.
hitachidigitalmedia.com).
Since some functions maybe limited, please see the instruction manual that is
supplied with the latest “Live Viewer 3”.
• Set your PC’s resolution to XGA or less. Refer to the user manual for your PC
or Windows.
• In some cases, your PC’s screen will not be displayed correctly by the
projector. If the resolution is larger than 1024x768, the projector can display
only the 1024x768 portion of the image.
• Images might not been transmitted, caused by OS version or the driver
software for Network Adapter on your PCs. It is highly recommended that OS
and the driver should be updated to the latest.