Filter
Top Products
34
• When entering the Passcode, capital and small letters are not
distinguished.
• If you are using any encryption code or your unique SSID or Subnet mask
excluding ClassA and B and C, it is required to set the connection manually.
If the manual setting screen is displayed, please follow the item 3.4.3.
NOTE
3.4 Passcode connection (continued)
If you select [Enter PassCode] at the item
3.3.3, the “Please enter the PassCode” screen
is displayed. Please enter the Passcode
divided 4-digit each in 3 boxes (total 12-digit).
Example PASSCODE: 1234 - 5678 - 9ABC
3.4.2 Entering the Passcode
After entering the Passcode, click [Connect] to start the connection to the
projector.
Proceed to the item 3.6 Conrm the connection to your destination. (
50)
If you click [Back], the screen is back to the item 3.3.3 Connecting to the
network. (31)
3. Using the Live Mode
[trouble shooting]
n Incorrect PassCode.
The incorrect Passcode was input.
Click [Back] to return to the “Please enter
the PassCode” screen.
Check the PassCode on the projector
screen (
32) and enter the code again.