Hitachi PJ-TX100 Projector User Manual


 
41
ENGLISH
Warranty And After-Service
Warranty and after-serviceWarranty and after-service
If a problem occurs with the equipment, fi rst refer to the “Troubleshooting” and
run through the suggested checks. If this does not resolve the problem, please
contact your dealer or the service company. They will tell you what warranty
condition is applied.
Specifi cations
Specifi cationsSpecifi cations
NOTE • This specifi cations are subject to change without notice.
Item Specifi cation
Product name Liquid crystal projector
Liquid
Crystal
panel
Panel size 1.8 cm (0.7 type)
Drive system TFT active matrix
Pixels 921,600 pixels (1280 horizontal x 720 vertical)
Lens Zoom lens F=1.8 ~ 2.4 f=20.0 ~ 31.9 mm
Lamp 150W UHB
Power Supply AC100-120V/2.4A, AC220-240V/1.1A
Power Consumption 220W
Temperature range 5 ~ 35°C (Operating)
Size
340 (W) x 110 (H) x 280 (D) mm (Not including protruding
parts)
• Please refer to the fi gure of the section “TECHNICAL” of
the end of this manual.
Weight (mass) 4.5 kg
Ports
Optional
parts
Lamp DT00661
Air fi lter NJ09452
Others • Please consult your dealer.
RGB input ports
Computer ........................1
DVI-D ..............................1
Video input ports
Video ..............................1
S-Video ..........................1
Component Video ...........1
(Y, Cb/Pb, Cr/Pr)
Control port
CONTROL ....................... 1