Hitachi CP-X807 Projector User Manual


 
60
3.8 Prole data
The network setting to connect the projector and PC can be stored as a prole
data. Once the data is stored, all you need to do is to select the data to connect to
the network. It is recommended when the same network connection is often used.
3.8.1 Outline of Prole data
The prole data is made on the Manual
Conguration screen. (41)
Up to 10 prole data can be stored for each
network adapter.
1) Select [Prole] and click [New].
2) The “Create new prole” will come up.
If you have already made 10 prole data,
you cannot make a new one, until you delete
a stored data.
Input all information required for your
network connection.
If you want to clear the information you input,
click [Clear].
3.8.2 Making Prole data
3) Click
[OK], after all information is set.
If you don’t want to store it, click [Cancel].
4) The new prole data is shown in the prole list, if you click [OK].
• When you make a new prole data, it is strongly recommended to
check that the new dada can work properly by selecting the data at the Prole
connection. (41)
• If you change a wireless network adapter on the projector or PC, make a new
prole data for the adapter.
NOTE
3. Using the Live Mode