Honeywell 2700 Scanner User Manual


 
9 - 1
9
Symbologies
This programming section contains the following menu selections. Refer to Chapter 13 for settings and defaults.
All Symbologies
If you want to decode all the symbologies allowable for your scanner, scan the All Symbologies On code. If on the other hand,
you want to decode only a particular symbology, scan All Symbologies Off followed by the On symbol for that particular sym-
bology.
Note: When All Symbologies On is scanned, 2D Postal Codes are not enabled. 2D Postal Codes must be enabled separately.
Message Length Description
You are able to set the valid reading length of some of the bar code symbologies. If the data length of the scanned bar code
doesn’t match the valid reading length, the scanner will issue an error tone. You may wish to set the same value for minimum
and maximum length to force the scanner to read fixed length bar code data. This helps reduce the chances of a misread.
All Symbologies GS1-128
Aztec Code In-Store Printed Bar Codes
Chinese Sensible (Han Xin) Code Interleaved 2 of 5
Codabar Matrix 2 of 5
Codablock A MaxiCode
Codablock F MicroPDF417
Code 11 MSI
Code 128 NEC 2 of 5
Code 32 Pharmaceutical (PARAF) Plessey Code
Code 39 PDF417
Code 93 QR Code
Coupon Code Settings Straight 2 of 5 IATA (two-bar start/stop)
Data Matrix Straight 2 of 5 Industrial (three-bar start/stop)
EAN/JAN-13 TCIF Linked Code 39 (TLC39)
EAN/JAN-8 Telepen
GS1 Composite Codes Trioptic Code
GS1 DataBar Expanded UPC-A
GS1 DataBar Limited UPC-A/EAN-13 with Extended Coupon Code
GS1 DataBar Omnidirectional UPC-E0
GS1 Emulation
All Symbologies On
All Symbologies Off