Honeywell 2700 Scanner User Manual


 
9 - 48
Programming Chart inside the back cover of this manual. Then scan the Save bar code. Default = 0.
UPC/EAN Addenda Redundancy
This programs the number of redundant scans required of a 2 or 5-digit addendum before it is attached to the UPC or EAN
bar code and submitted. To adjust the redundancy, scan the Redundancy bar code below for the 2 or 5-digit addenda you
want to adjust, then scan a redundancy count between 0 and 10 on the Programming Chart inside the back cover of this
manual. Then scan the Save bar code. Default = 2 for 2-Digit Addenda, 1 for 5-Digit Addenda.
ISBN Translate
When On is scanned, EAN-13 Bookland symbols are translated into their equivalent ISBN number format. Default = Off.
Convert ISBN to 13-Digit
When translating EAN-13 codes to the ISBN format, you can convert the bar code to a 13 digit format by scanning the
Convert to 13-Digit On bar code below. Default = Convert to 13-Digit Off.
EAN/JAN-13 Redundancy
2-Digit Addenda
Redundancy
5-Digit Addenda
Redundancy
On
* Off
Convert to 13-Digit On