Filter
Top Products
3 - 35
NCR NOF (Not-on-File) Number of Beeps
When using NCR NOF (Not-on-File) Error, set the number of beeps or error tones, from 1 to 7, the scanner emits when
it receives an NOF from the POS system. Default = 1.
Do Not Wait for NCR Weight
A get weight command waits until either a weight is ready or the command is canceled. If you do not want the scanner to
wait for an answer, scan the Do Not Wait bar code. If you do want the scanner to wait, scan the Wait bar code. Default =
Wait.
NCR Weight Timeout
A get weight command waits until either a weight is ready or the command is canceled. If you wish to set a timeout for this
wait time, scan the NCR Weight Timeout On bar code. You must then set the timeout using the Timeout bar code which
follows. If you want to cancel the weight timeout, scan the NCR Weight Timeout Off bar code. Default = NCR Weight Tim-
eout Off.
* Off
NCR Number of Beeps
* Wait
Do Not Wait
* NCR Weight Timeout Off
NCR Weight Timeout On