Honeywell 2700 Scanner User Manual


 
4 - 11
Programming Chart inside the back cover of this manual. Default = 1.
Beep on EAS Deactivation
After a good read, the beeper will beep quickly (chirp) upon EAS deactivation when Beep on EAS Deactivation is set to
On. If you do not want a chirp on EAS deactivation, scan Beep on EAS Deactivation Off. Default = Off.
Error Indicators
Beeper Pitch – Error
The beeper pitch codes modify the pitch (frequency) of the sound the scanner emits when there is a bad read or error.
Default = Razz.
Number of Beeps/LED Flashes – Error
The number of beeps and LED flashes emitted by the scanner for a bad read or error can be programmed from 1 - 9. For
example, if you program this option to have five error beeps, there will be five error beeps and five LED flashes in response
to an error. To change the number of error beeps, scan the bar code below and then scan a digit (1-9) bar code and the
Number of Good Read Beeps/LED Flashes
* Beep on EAS Deactivation
Off
Beep on EAS Deactivation On
* Razz
Medium Razz
High Razz