Honeywell 7800 Tablet User Manual


 
14 - 1
14
Dolphin 7800 QuadCharger Device (Model 7800-QC)
Overview
This 4-slot charging station provides intelligent battery management for the rechargable battery packs
used in Dolphin terminals.
The 7800-QC charger is designed for use with standard battery pack model 7800-BTSC or 7800-
BTSCW (Li-ion 3.7 V, 8.9 watt hour) and extended battery pack model 7800-BTXC or 7800-BTXCW (Li-
ion 3.7 V, 14.8 watt hour) manufactured for Honeywell International Inc.
Warning! The QuadCharger is not designed for use in hazardous locations.
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any
non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.
Unpacking the QuadCharger
Open the shipping box and inspect the package to see that the following standard items are included:
One QuadCharger, model 7800-QC
One power supply (see Power on page 14-3)
One power cord
These items are needed to operate the QuadCharger. If any items are missing or anything appears to be
damaged, contact your Customer Account Representative. Keep the original packaging in case you
need to return the HomeBase for service or to store the HomeBase while not in use.
Charging Overview
Each charging slot works independently of the other three. As battery packs charge, the charging cir-
cuitry follows the two-step charging process (CC-CV) that is recommended for the battery type. The pro-
cess monitors changes in temperature, current, and voltage and resets the battery pack. Charge time is
4 hours for the standard battery or 6 hours for the extended battery.
Note: Before attempting to use, charge, or replace the battery in the terminal, you should read the Guidelines for
Battery Pack Use and Disposal on page 3-13.
Capacity
The charger holds 4 Honeywell standard or extended batteries.
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty.
!
!
!