Honeywell 7800 Tablet User Manual


 
2 - 9
Menu Button
Press the MENU button on your keyboard to access options relevant to the open application.
Suspend Mode
Suspend Mode turns the touchscreen off and locks the terminal. To save battery power, the terminal
enters Suspend Mode when the device is inactive for a programmed period of time. To adjust the timeout
limit, tap the Launcher > Settings > Display > Screen Timeout.
1. Press and release the Power key to toggle the terminal in or out of Suspend Mode.
2. Drag to the right on the touchscreen to unlock the terminal.
Note: You should always place the terminal in suspend mode when replacing the battery pack.
Silent Mode and Airplane Mode
1. Press and hold the Power key for approximately 5 seconds.
2. Tap Silent Mode or Airplane Mode on the Phone Options menu to toggle the mode on or off.
Note: When Airplane Mode is turned on,
shows on the status bar.
Replacing the Main Battery Pack
Note: Before replacing the main battery pack, read the Guidelines for Battery Pack Use and Disposal on page 3-13.
Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet
components may cause damage not covered by the warranty.
1. Press the Power key to put the terminal in Suspend Mode.
2. Release the hand strap near the speaker on the back panel of the terminal.
3. Unlock the battery by sliding the latch away from the battery.
4. Wait at least 3 seconds, then slide the battery release button away from the stylus slot.
!