Filter
Top Products
1 - 1
Dolphin 7800 mobile computers meet or exceed the requirements of all applicable standards
organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe
operation is to operate them according to the agency guidelines that follow. Read these guidelines
carefully before using your Dolphin terminal.
This documentation is relevant for the following Dolphin models: 7800L0, 7800LW.
CAUTION - Read the Guidelines for Battery Pack Use and Disposal on page 3-13 and all cautionary markings
on the battery, charging peripheral, or device using the battery before attempting to install, use, or charge
the battery. Risk of fire and burns if improperly handled. Do not open, crush, heat above 60°C (140°F),
or incinerate.
Label Locations
Model Number, Serial Number and IMEI Labels
The model (item) number, serial number, and international mobile equipment identity (IMEI) number for
the terminal are located on labels affixed to the walls of the battery well.
Laser Safety
Laser Safety Label
If the following label is attached to your product, it indicates the product contains an engine with a laser
aimer:
Laser Safety Statement
This device has been tested in accordance with and complies with IEC60825-1(Ed. 2.0), EN60825-
1:2007. Complies with 21 CFR 1040.10 and 1040.11, except for deviations pursuant to Laser Notice No.
50, dated June 24, 2007. LASER LIGHT, DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT,
1.0 mW MAX OUTPUT: 650nm.
WARNING - Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
!
Compliance Label
Compliance Label
Dolphin 7800 Back Panel
(battery removed)
ʳ
Image Engines with Integrated Laser Aimers
!
1
Dolphin 7800 Terminal Agency Information