Honeywell 8600 All in One Printer User Manual


 
4 - 23
Scan Data Transmission Format
Note: Parameter Prefix/Suffix Values for SSI hosts should be set after setting this parameter.
Note: Ring decoder engine prefix and suffix parameters should not be set, changed, or reset using the Prefix and Suffix bar
codes shown in this section. When the Ring Scanner Module is reset to defaults, the prefix and suffix settings revert
to their default values and need to be scanned again. Use the ScanWedge NGW Power Tool (Dolphin 70e) or
Scanner control panel (HX2 or HX3) in the host computer to store prefix and suffix values.
Note: Use this option when you want to append a prefix and suffix to the SSI host decode data. If you wish to change your
selection, scan the Cancel bar code and scan again.
Set the Scan Data Transmission Format parameter by scanning one of the following bar codes:
* Data As Is
[Data] [Suffix 1]
[Data] [Suffix 2]
[Data] [Suffix 1] [Suffix 2]
[Prefix] [Data]