Filter
Top Products
HotBrick Network Solutions
Page 29
• This address should be static, rather than dynamic, to make it easier for Internet users to connect
to your Servers. However, you can use the Dynamic DNS feature (explained later in this chapter)
to allow users to connect to your Virtual Servers using a URL, instead of an IP Address.
e.g.
HTTP://my_domain_name.dyndns.org
FTP://my_domain_name.dyndns.org
Figure 4-3: Virtual Server
Settings – Virtual Server
Enable
Use this to Enable or Disable each Virtual server as required.
Server Type
Select the desired Server type. If the type of Server you wish to use is not listed,
use the Custom Virtual Server screen to define your own type.
LAN IP
Address
Enter the IP address of the PC on your LAN which is running the required Server
software.
Each PC should have a fixed IP address, or have a reserved IP address. (See the
Host IP section earlier in this chapter for details on reserving an IP address.)