Filter
Top Products
HotBrick Network Solutions
Page 33
Special Application Configuration
Use this to Enable or Disable this Special Application as required.
Enable Name
Enter a descriptive name to identify this Special Application.
Outgoing Protocol
Select the protocol used by this application, when sending data to the
remote server or PC.
Outgoing Port Range
Enter the beginning and end of the range of port numbers used by the
application server, for data you send. If the application uses a single
port number, enter it in both fields.
Incoming Protocol
Select the protocol used by this application, when receiving data from
the remote server or PC.
Incoming Port Range
Enter the beginning and end of the range of port numbers used by the
application server, for data you receive. If the application uses a single
port number, enter it in both fields.
Buttons
• Add – Create a new Special Application entry.
• Delete – Delete the selected entry.
• Update – Save any changes you have made to the current entry.
• Cancel – Cancel any changes you have made since the last save
operation.
Special Application
List
This shows details of all Special Applications which are currently
defined.
Using a Special Application on your PC
• Once the Special Applications screen is configured correctly, you can use the application on your
PC normally. Remember that only one (1) PC can use each Special application at any time.
• Also, when 1 PC is finished using a particular Special Application, there may need to be a "Time-
out" period before another PC can use the same Special Application.
• If an application still cannot function correctly, try using the "DMZ" feature, if possible.