Filter
Top Products
IBM TotalStorage DR550 SMB Version 1.0 ------ 27 May 2005 Page 20
IBM Storage Systems Copyright © 2005 by International Business Machines Corporation
Single Node - All Configurations
7316-TF3 Console with
KVM switch (FC 4202)
and IBM supplied video,
keyboard and mouse
cables (FC 4242)
Netbay LCM
P5 520
(DRS_Engine)
Cat 5 cable connected to
USB Conversion Option
cable (78P5833 -
7316-TF3 FC 4269 ) - IBM
Supplied
10/100/1000 (T6)
HMC1
HMC2
System
board
10/100/1000 (T5)
USB0 (T7)
USB1 (T8)
Pwr GXT135p Graphics
Adapter - Slot 2
2 Port 10/100/1000 Ethernet
SX PCI-X Adapter - Slot 1
2 Gb Fibre Channel
Adapter - Slot 6
As an option, you can attach an external monitor using the serial port on the P5 520. To interact
with the system software interfaces or to run diagnostics from a DVD-RAM using an external device,
you will need to do the following:
• Connect a terminal (or PC) to the serial port FS1 (on the front of the unit) using a null-modem
cable (RJ45 to 9 pin Serial cable which is provided by IBM)
Your PC may need to use an emulator, such as HyperTerminal, often supplied with Windows family
operating systems. Set the emulation mode to vt100 and use the following communication settings:
• 19200 baud
• 8 bit
• 1 stop bit
• No parity
• Xon/Xoff
The following procedure is to connect the ASCII (tty) terminal (or PC) to the P5 520 (this is provided
as information only as it is recommended that you use the integrated console for all DR550
management activity:
1. Before doing this step, read and understand “Read the Safety Notices”.
2. This system drawer is equipped with serial port 1 located in the front (FS1) and rear (S1) of
the system.
3. Use an RJ-45 to 9-pin serial null modem cable (IBM supplied) to connect to the front serial
port FS1.
4. When using FS1, the rear serial port 1 is deactivated.