IBM SA38-0512-03 Server User Manual


 
Table 4-2 (Page 2 of 2). Bus SRN to FRU Reference Table
SRN Bus
Identification
Possible Failing Device and AIX
Location Code
Associated
FRU
Device installed in I/O Slot 4P (10-70
to 10-77)
Adapter
Device installed in I/O Slot 5P (10-78
to 10-7F)
Adapter
9CC-101 PCI Bus 01 Device installed in I/O Slot 1P (20-58
to 20-5F)
Adapter
Device installed in I/O Slot 2P (20-60
to 20-67)
Adapter
651-730 ISA Bus Diskette Drive port/device
(01-D1-00-00)
I/O board. (See
note at the
bottom of this
table.)
Parallel port/device (01-R1) I/O board. (See
note at the
bottom of this
table.)
Serial ports (1-2)/device (01-S1 to
01-S2)
I/O board. (See
note at the
bottom of this
table.)
Mouse port/device (01-K1-01-00) I/O board. (See
note at the
bottom of this
table.)
Keyboard port/device (01-K1-00-00) I/O board. (See
note at the
bottom of this
table.)
Audio port/device (01-FF) I/O board. (See
note at the
bottom of this
table.)
Tablet port/device (01-FF) I/O board. (See
note at the
bottom of this
table.)
Note: If a network adapter, or the I/O board is replaced, the network administrator must be notified
so that the client IP addresses used by the server can be changed. In addition, the operating system
configuration of the network controller may need to be changed in order to enable system startup.
Also check to ensure that any client or server that addresses this system is updated.
4-12 7043 43P Series Service Guide