Filter
Top Products
© Copyright IBM Corp. 2003, 2006 321
Chapter 26. BladeCenter
®
H 8852
Notes:
1. Model number is a worldwide general available variant (GAV) model number which is not orderable as
listed and needs to be modified by country. The U.S. GAV model numbers use the following
nomenclature: xxU. For example, the U.S. orderable part number for 8677-4XY is 8677-4XU. See the
product specific Official IBM announcement letter for other country-specific GAV model numbers.
2. Housed in a 19in rack-mountable chassis.
3. The advanced management modules for BladeCenter H include KVM components.
4. Does not ship with a diskette drive. An external FDD is supported attached to one of the two front
mounted USB ports.
5. Supports up to 14 single-wide blade servers. Additional power supplies are required to maintain full
redundancy beyond seven blade servers.
6. Only the read function is supported on the Combo II drive.
Table 63. BladeCenter H 8852 At-A-Glance
Part Number
1
Form Factor (Width/Depth)
2
Power Modules
Power Module Quantity (Std/Max)
Hot-Swap (Power, Bays, Blowers)
Redundancy (Optional, Standard)
Advanced Management Module (Std/Max)
3
I/O Module Bays (Total/Avail)
Optical Drive
Diskette Drive
4
Blade Bays (Total/Avail)
5
8852-4XY Rack (9U)
19in x 29in
2900w
(200v-240v)
2/4 P, B,
B
S-Blowers,
S-Power
1/2 10/10 Combo II
6
24x/24x/24x/8x
- 14/14
Note: Two power cords are needed but must be ordered separately.
Note: BladeCenter Chassis can provide increased density per rack over standalone 1U servers by housing multiple
blades in less rack space. BladeCenter solutions increase usability and reduce complexity by providing
common sourcing for blade servers, cabling, cabling connections, I/O options, power modules, system
management requirements (optional adapters and external cabling), external Fibre Channel storage switching
and connectivity, and network management and expansion.