32" 1080p LED-LCD HDTV
QUICK SETUP GUIDE
NS-32E570A11
Thank You
for purchasing this ne Insignia television.
We hope you enjoy the quality and reliability
of this product for years to come.
_______________________________
19"/22" LED TVs
NS-19E450A11/NS-19E450 WA11/NS-22E450A11
User Guide
Universal remote control TV codes (for all Insignia TVs manufactured after Jan. 1, 2007)
Philips
PHDVD5, PH5DSS,
PMDVR8, PDVR8
115
DirectTV
RC23
10463
RCA
RCU807
135
One for All
URC-6690
0464
Sony
RM-VL600
8043
Comcast
M1057
0463
Dish Network
VIP508, VIP622
720
Motorola
DRC800
0463
TIVO
Series 3, HD
0091
Universal remote control makers and models Set-top box makers and models
TV stand and 4 screws
User Guide
Quick Setup Guide
Remote
control sensor
Power
indicator
Remote control
and AAA
batteries
Component
cable
Audio
cable
AC
power
cord
Remote
control holder
Cleaning
cloth
Front features
Installing the stand
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Slide the stand into the stand grove, then secure the stand to the screen
with the four provided screws.
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Remove the four screws holding the TV to its stand, then remove the
stand.
3 Secure the wall-mount bracket to the back of your TV using the screws
provided with the bracket.
Setting up your remote control
1 While pressing the release button on the battery compartment cover on
the back of the remote, lift the cover o the remote.
2 Insert two AAA batteries into the battery compartment. Make sure that the
+ and – symbols on the batteries align with the + and – symbols in the
battery compartment.
3 Replace the cover.
Programming your existing universal remote control
To program your existing universal remote control to work with your new
Insignia TV, see the table below for common codes. If you have problems
programming your remote or need a dierent remote control code, visit
www.insigniaproducts.com for the latest remote control code information.
See your manual to program your universal insignia remote to control other
devices.
Connecting a DVD or Blu-ray DVD player, cable
box, satellite receiver, or game station
Using HDMI (best)
Using component (good)
Connecting an antenna
Connect a coaxial cable (not included) to the ANT/CABLE IN jack on the
back of your TV and the RF OUT jack on the antenna.
