Insignia NS-PU98505 Network Card User Manual


 
Thank you for purchasing this high quality Insignia USB to Ethernet
Adapter. Use this adapter to instantly connect to a 10/100 Mbps network
from the USB port on your desktop or laptop computer.
PACKAGE CONTENTS
USB to Ethernet Adapter
• Driver CD
Quick Setup Guide
SETTING UP THE ADAPTER
Note: The driver software must be installed before you connect the adapter. The
adapter does not need to be connected for the software to install.
To install on a Windows PC:
1 Insert the driver CD into the optical drive on your computer. The
software should run automatically. The initial installation screen opens.
Note: If the software does not run automatically, locate and double-click
Run.exe on the driver CD.
2 Click on your operating system, then follow on-screen instructions.
Note: If the computer has Windows 8, you do not need to install the driver from
the disc. The drivers are installed automatically.
3 When the installation is complete, click Finish to restart your
computer and nish the installation.
4 Connect the USB connector on the adapter to an open USB port on
your desktop or laptop computer.
5 Connect a network cable to the Ethernet port on the adapter.
To install on a Mac:
1 Insert the driver CD into the optical drive of your computer. On the
driver CD, locate and click AX88772.dmg. Click the AX88772 icon
( ). The driver setup driver setup dialog box opens.
Quick Setup Guide
I
NS-PU98505/NS-PU98505-C
USB to Ethernet Adapter
Before using your new product, please read these instructions to prevent any damage.