Filter
Top Products
Mobile Intel
®
915GME Express Chipset
April 2007 Development Kit User’s Manual
Order Number: 317230-001US 37
Hardware Reference—Mobile Intel
®
915GME Express Chipset
4.3 Configuration Settings
Note: Do not move jumpers with the power on. Always turn off the power and unplug the
power cord from the computer before changing jumper settings. Failure to do so may
cause damage to the board.
Figure 4 shows the location of the configuration jumpers and switches.
Table 8 summarizes the supported jumpers and switches and gives their default and
optional settings.
Table 9 summarizes the unsupported jumpers and switches and gives their default
position. The unsupported jumpers must remain in their default position or the
operation of the platform is unpredictable. The Mobile Intel
®
915GME Express Chipset
board is shipped with the jumpers and switches shunted in the default locations.
Figure 4. Configuration Jumper and Switch Locations