Filter
Top Products
- 33 -
Intel 945 Series User's Manual
4.5.9 PC Health Status
・
Smart FAN Control
This item allows you to control the CPU fan speed. When set to [Enabled], the following
items become selectable.
・
FAN Target Temperture
This item sets the temperature mark for the “Smart Fan” function to take effect.
・
FAN Min Speed
This item sets the speed ratio for the 4-pin CPU fan assembly connected at “CPUFAN1”
fan power connector to start running.
・
All Voltages, Fans Speed and Thermal Monitoring
These unchangeable items list the current status of the CPU and environment
temperatures, fan speeds, and system power voltage.
・
Shutdown Temperature
You can set the processor shutdown temperature here. If the processor temperature
exceeds the settings value, system will force to shutdown to protect the processor not
overheat.
・
Sensor Show On Post
Show the system status when post.
Phoenix - AwardBIOS CMOS Setup Utility
PC Health Status
Smart FAN Control
x FAN Target Temperture
x FAN Min Speed
[Disabled]
30
60 %
Item Help
Menu Level
►
** MainBoard Temperature Items **
Sys Temp.
CPU Temp.
28
o
C/ 82
o
F
30
o
C/ 86
o
F
** MainBoard Fans Items **
SYSFAN1.
CPU FAN.
SYSFAN2.
0 RPM
4218 RPM
0 RPM
** MainBoard Voltage Items **
CPU VCORE
+ 12 V
+3.3 V
DIMM VCC
VCC CHIP
+ 5 V
VBAT(V)
3.3VSB
Shutdown Temperature
Sensor Show On Post
1.27 V
12.09 V
3.26 V
1.84 V
1.49 V
5.12 V
3.13 V
3.23 V
[Disabled]
[Enabled]
↑↓
→←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Disabled