Filter
Top Products
ADE-9040 User’s Manual
24 / 55
3.2 Main Memory
ADE-9040 provides 2 DIMMs (240-pin Dual In-line Memory Module) to support 1.8V
DDRAM (Synchronized DRAM) as on-board main memory. The maximum memory size is
256 MB ~ 4 GB with using 256MB/512MB/1GB technology. Supports up to 2 double sided
DIMMs at DDR2 533/667/800MHz. The memory architecture adopts 128-bit data interface
to support for x8 and x16 DDRAM(DDR2) device width. In addition, it only supports
Non-ECC memory.
For system compatibility and stability, don’t use memory module without brand. You can
also use the single or double-side DIMM .The two DIMMs can be out of order. You can
install different size of DDRAM module on DIMM1, DIMM2 or all to boot up system.
Without out the contact and lock integrity of memory module with socket, it will impact on
the system reliability. Follow normal procedure to install your DDRAM module into memory
socket. Before locking, make sure that the module has been fully inserted into the DIMM
slot.
NOTE: For maintaining system stability, do not change any of DDR2 memory parameters in
BIOS setup to upgrade your system performance without acquiring technical
information.