Filter
Top Products
Chapter 7 LANDesk User Guide
42 AI5VG Pentium VP3 Baby AT Motherboard User’s Manual
6.6 Power Management Setup
The Power Management Setup allows you to save energy of your system
effectively. It will shut down the hard disk and turn off video display after
a period of inactivity.
ROM PCI/ISA BIOS (2A59IM29)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management : User Define Primary INTR : ON
PM Control by APM : Yes IRQ3 (COM2) : Primary
Video Off Option : Suspend -> Off IRQ4 (COM1) : Primary
Video Off Method : V/H SYNC +Blank IRQ5 (LPT 2) : Primary
MODEM Use IRQ : 3 IRQ6 (Floppy Disk) : Primary
Soft-Off by PWRBTN : Instant-Off IRQ7 (LPT 1) : Primary
IRQ8 (RTC Alarm) : Disabled
** PM Timers ** IRQ9 (IRQ2 Redir) : Secondary
HDD Power Down : Disabled IRQ10 (Reserved) : Secondary
Doze Mode : Disabled IRQ11 (Reserved) : Secondary
Suspend Mode : Disabled IRQ12 (PS/2 Mouse) : Primary
IRQ13 (Coprocessor) : Primary
** PM Events ** IRQ14 (Hard Disk) : Primary
VGA : OFF IRQ15 (Reserved) : Disabled
LPT & COM : LPT / COM
HDD & FDD : ON ESC : Quit
Ç
È
Æ
Å
: Select Item
DMA / master : OFF F1 : Help
PU/PD/+/- : Modify
Modem Ring Resume : Disabled F5 : Old Values (Shift) F2 : Color
RTC Alarm Resume : Disabled F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Power Management
This field allows you to select the type of power saving management
modes. There are fours selections for Power Management.
Disabled No power management.
Min. Power Saving Minimum power management.
Max. Power Saving Maximum power management. Only
available for SL CPU.
User Define Each of the ranges are from 1 min. to
1hr. Except for HDD Power Down
which ranges from 1 min. to 15 min.
(Default)
NOTE: In order to enable the CPU overheat protection feature, the
Power Management field should not be set to Disabled.