Filter
Top Products
Installing and Replacing Desktop Board Components
57
Connecting Power Supply Cables
Figure 27 shows the location of the power connectors.
CAUTION
Failure to use an appropriate power supply and/or not connecting the 12 V
(Figure 27, A) power connector to the Desktop
Board may result in damage to the
board or the system may not function properly.
The 2 x 12 pin main power connector (Figure 27, B) is backwards compatible with
ATX12V po
wer supplies with 2 x 10 connectors.
Figure 27. Connecting Power Supply Cables
1. Observe the precautions in "Before You Begin" on page 31.
2. Connect the 12 V processor core voltage power supply cable to the 2 x 4 pin
connector (Figure 27, A).
3. Con
nect the main power supply cable to the 2 x 12 pin connector (Figure 27, B).