BX400ii Interposer Board User’s Manual 5
1.0 Introduction
This document introduces the BX400ii Interposer Board and provides installation instructions.
The BX400ii Interposer Board with the Intel
®
Mobile Pentium
®
II Processor emulates the
functionality of the Intel
®
Pentium
®
II Processor Mobile Module to provide a bus interconnect for
emulation and logic analysis tools. This board is used for Intel Pentium II Processor Mobile
Module system designs.
Note: Due to additional signal loading and trace lengths, the BX400ii Interposer Board may not function
in all system designs.
1.1 Key Terms
LPM refers to the Intel
®
Low Power Pentium
®
II Processor module. This module is identical to
the Intel Pentium II Processor Mobile Module Connector (MMC-2). A complete description of this
module is located in the Intel
®
Pentium
®
II Processor Mobile Module: Mobile Module Connector
2(MMC-2)datasheet (http://developer.intel.com/design/mobile/datashts).
82443BX refers to the Intel 82443BX Host Bridge Controller.
1.2 Related Documents
Table 1. Related Documents
Document Order #
Intel
®
Pentium
®
II Processor Mobile Module: Mobile Module Connector 2 (MMC-2) datasheet 243668
Intel
®
Pentium
®
II Processor at 233 MHz, 266 MHz and 300 MHz datasheet 243669
Mobile Pentium
®
II Processor Specification Update 243887
Intel
®
440BX AGPset: 82443BX Host Bridge/Controller datasheet 290633
Table 2. Vendor Reference
†
Vendor Name Contact Information
American Arium
(714) 731-1661
http://www.arium.com/aaprod.htm
Applied Microsystems Corporation
(800) 426 3925
http:/www.amc.com
Hewlet Packard
(800) 452-4844
http://www.tmo.hp.com
Microtek International
(800) 886-7333
http://www.microtekintl.com
Te kt r on ix
(800) TEK-WIDE
http://www.tek.com
Ironwood Electronics (for adapters only)
(800) 404-0204
http://www.ironwoodelectronics.com
† Intel does not endorse or recommend third-party vendors.