Filter
Top Products
Address Table Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 31
Default Configuration
No addresses are defined.
Command Mode
Interface Configuration (Ethernet, port-channel) mode. Cannot be configured for a range
of interfaces (range context).
User Guidelines
The command enables adding secure MAC addresses to a routed port in port security
mode. The command is available when the port is a routed port and in port security mode.
The address is deleted if the port exits the security mode or is not a routed port.
Example
In this example, the MAC-layer address 66:66:66:66:66:66 is added to port 1.
show bridge address-table
The show bridge address-table Privileged EXEC mode command displays all entries in
the bridge-forwarding database.
Syntax
show bridge address-table [vlan vlan] [ethernet interface | port-channel port-channel-
number | address mac address]
Parameters
• vlan — Specifies a valid VLAN, such as VLAN 1.
• interface — A valid Ethernet port.
• port-channel-number — A valid port-channel number.
• mac address — A valid MAC address.
Default Configuration
This command has no default configuration.
Console(config)#
interface ethernet
ext.1
Console(config-if)#
port security routed secure-address
66:66:66:66:66:66