Filter
Top Products
Intel® Solid-State Drive 530 Series (2.5-inch)
October 2013 Product Specification
Order Number: 329212-003US 9
Table 6: Latency
Specification Intel® SSD 530 Series
80 GB 120 GB 180 GB 240 GB 360 GB 480 GB
Read
1
80 µs (TYP)
85 µs (TYP)
1 s (TYP)
Write
1
Power On To Ready
2
Note:
1. Based on sequential 4 KB using Iometer with Queue Depth 1 workload with compressible (non-random)
data pattern. Write Cache enabled.
2. Power On To Ready time assumes proper shutdown
2.3 Electrical Characteristics
Table 7: Operating Voltage and Power Consumption
Electrical Characteristics Value
80 GB 120 GB 180 GB 240 GB 360 GB 480 GB
Operating Voltage for 5 V (±5%)
Min
Max
Rise Time (Max/Min)
Fall Time (Max/Min)
Noise Tolerance
Min Off Time
1
4.75 V
5.25 V
100 ms / 0.1 ms
5 s / 1 ms
100 mV pp (10 Hz – 30 MHz)
1 s
Power Consumption (TYP)
Active
2
Idle
3
DevSleep
4
195 mW
125 mW
5 mW
Thermal Power
5
2.8 W
3.1 W
3.7 W
4.5 W
4.5 W
4.5 W
Regulator Power
6
3.4 W
3.4 W
4.0 W
4.9 W
5.0 W
5.0 W
Note:
1. Minimum time from when power removed from drive (Vcc < 100 mV) to when power can be reapplied
to drive.
2. Active power measured during execution of MobileMark* 2007 with SATA Link Power Management
(LPM) enabled.
3. Non-DevSleep idle power with SATA Link Power Management (LPM) enabled.
4. Power consumption during DevSleep state.
5. Power measured during 128 KB sequential writes with Queue Depth 32 workload using 100 ms sample
period. This represents power that would be thermal load on system during heavy workloads.
6. Power measured during 128 KB sequential writes with Queue Depth 32 workload using 500 µs sample
period. This represents power that system power supply would have to regulate for proper device
operation.