Filter
Top Products
The table will list the available access points near the MFP server. Select an
access point on the list and click “Next.” If you can’t nd the access point that you
want to use, click “Scan” to let the MFP server scan again.
The 1-Port MFP USB Wireless Print Server supports WEP, WPA-PSK and WPA2-
PSK security modes. Make a selection from the Security Mode drop-down menu,
then follow the corresponding procedure below to implement your chosen mode.
WEP Security Mode
To use WEP encryption, select “WEP(ASCII)” or “WEP(HEX).” The wireless
security setting should match other wireless devices in the same network.
25
SERVER CONFIGURATION