Filter
Top Products
Intermate100 and Intermate101 Print Server Administration Manual 143
[Local Printer Parallel Port]: Enable Power Detection
18.8. Enable Power Detection
With this parameter, you can specify whether or not you want
the
print server to reboot automatically if the local printer is
powered On.
Tip:
Disable this if you are using NDO!
But otherwise, we recommend that you keep the
option at its default setting (= Yes) to allow for easier
rebooting and to prevent the power socket in the
print server from getting worn down.
Value Comments
Yes * Enable power detection.
No Disable power detection.