Filter
Top Products
Intermate100 and Intermate101 Print Server Administration Manual 4
Introduction: Target Audience and Products
1. Introduction
1.1. Target Audience and Products
1.1.1. Target Audience
You are a “printer administrator” with responsibility for configur-
ing and administrating printers and print servers. You may also
be a “network administrator”, and if not, you will sometimes
need to talk with one.
The information in this manual does not cover special option
settings intended for our partners. Please contact our support
department if you need information about the special “OEM”
settings.
1.1.2. Print Servers, Component Codes and Release Levels
Tip:
See
“What the Firmware File Names Mean” [page 198]
if you need help to understand the component and
firmware level codes.
Everything in our documentation is applicable to the
Intermate1xx, meaning all variants of the Intermate100 and the
Intermate101 unless stated otherwise.
• Main code G22 covers the Intermate100
• Main code G32 covers the Intermate101
• Main code G34 covers the Intermate101-JScribe
model. Everything applicable to G32—except IPDS—is
also applicable to G34.
About release levels for major releases of G22 and G32
The manual includes comments showing when features have
been added or significantly changed so that those who con-
tinue to use older versions can see if they might want to
upgrade, and those who have converted up from older ver-
sions can see where there might be problems.
Our release notes, which can always be found on our web site,
are detailed and cumulative.