Filter
Top Products
Intermate100 and Intermate101 Print Server Administration Manual 62
OS/2 2.x and OS/2 Warp: LPR (ASCII data, e.g. PCL and Postscript)
6 An OS/2 printer device and queue is now created and the
print server is ready to receive print from any OS/2
application.
8.2.2. Print using LPR command from the Command Line
When printing from the OS/2 command line the command LPR
can be used.
LPR -b -s<server> -p<queue> <file>
Example: Type the following line to print the file config.sys
from the command line, using the default pre-configured queue
name (PAR_B) from the print server.
LPR -b -s192.168.0.227 -ppar_b config.sys
8.2.3. Print from WIN-OS/2 using the LPRMON command
The LPRMON command is used to monitor one of the parallel
ports LPT1 - LPT3 and to redirect print data from the parallel
port to the TCP/IP LPD port. If you want to print from WIN-
OS/2, and you do not have the DOS/Windows TCP/IP access
kit, you can use the LPRMON command.
LPRMON -b -s<server> -p<queue> LPT<n>
Example: Type the following command to redirect the LPT3
port to the TCP/IP LPD port.
LPRMON -b -s192.168.0.227 -ppar_b LPT3
Element Replace with
<server>
The IP address or the Host name of the print server.
<queue>
a queue name as defined in
4b
above,
page 60
.
<file>
The name of the file to print.
Element Replace with
<server>
The IP address or the Host name of the printer.
<queue>
a queue name as defined in
4b
above,
page 60
<n>
Number of the parallel port to redirect.