Filter
Top Products
SECTION 36620 Recovery Procedures
3-2 6620 Hand-Held Computer Technical Reference
This can be accessed by booting directly to the recovery
partition, and using the menu to choose to:
" Image the “Main Data Partition”
" Set up a MASTER mode system (system duplication)
" Set up a SLAVE mode system (system duplication)
Booting to the recovery partition can be done by using the
PARTUTIL.EXE executable with the /S parameter (see
page 3-27 for Partition Utility information).
Because of this new functionality, use of the floppy disks to
perform system imaging is interrupted by a menu during
the boot of the recovery partition. Choose option 5 (exit)
and follow the instructions for the appropriate section.
Complete System Recovery
The first step involves partitioning, formatting (thus eras-
ing all data on the hard drive), imaging, and activating “Re-
covery Windows.” The second step, in “Recovery Windows,”
recovers the “Main Data” partition (or complete system).
Restoring Recovery Windows
This process restores “Recovery Windows” from an image
stored on the 6620 Recovery CD-ROM.
Using Another PC
This process restores from the CD-ROM shared with anoth-
er PC on the network:
On the Remote Machine
1. Insert the 6620 Toolkit CD into the drive. If the “6620
Recovery Utility” is launched, close the utility.
2. Ensure the CD-ROM drive is shared and note its
Share name.