Filter
Top Products
Chapter 1 — Using the CK30 Handheld Computer
CK30 Handheld Computer User’s Manual 23
Scan button
NTERMEC
*INTERMEC*
C
Good Read light
Scanning: Using the 2D imager to scan a bar code label.
When the CK30 successfully reads a bar code label, you hear
a high beep and the green Good Read light turns on briefly.
4 Release the Scan button.
Attaching a Tethered Scanner
You can use a tethered scanner with the CK30 if you ordered it
with a 10-pin tethered scanner port in place of the integrated
scanner.
The following devices are currently supported by the CK30:
Supported Device Required Cable
1550C 068419-001
1551E 3-606034-02
1553 3-606034-02
128X wand 069444-002
Wand emulation 3-606031-00
Supported 1550C series scanners include: 1550C0100,
1550C102, 1550C104, and 1550C105.