Filter
Top Products
18
Deleting RAID Sets
1. As the BIOS boots, Press CTRL+S or F4 to enter the RAID bios utility.
2. Select Delete RAID set. Press Enter.
3. Answer Y to remove the RAID set. If the RAID set being deleted is a Striped, then all of the data will be
lost. If the set being deleted is a Mirrored set, then the data will remain intact and accessible on both
drive sets.
Rebuilding Mirrored Sets (RAID 1)
1. After replacing the failed hard drives boot the BIOS, Press CTRL+S or F4 to enter the RAID bios utility.
2. Select Rebuild RAID 1 set. Press Enter.
3. Select Rebuild Hard Drive. Press Enter.
4. Answer Y to rebuild the Mirrored set of hard drive.