Filter
Top Products
7
Introduction
MICPOWER
PLUG IN
AV DCEXTEND
Pantilter
When using the pantilter, connect the AC adapter, AV cord, and external mic to the pantilter.
Front
Bottom
Back
1
1
2
2
1
67
3
8
45
1
Power button
Press and hold to power on. To power off, press and
hold this button again.
2
Power lamp
Indicates the pantilter status.
Off: Powered off
Lit up: Powered on
Blinking: Pantilter error
1
Tripod mounting hole
Mount a separately purchased tripod.
1
Tilt lock (TILT LOCK)
Face the pantilter right in front and slide the knob to
the left to lock it. Be sure to lock the pantilter when
carrying it.
2
Camera fixing screw
Secures the camera to the pantilter.
3
Fixing hole for drop prevention
Secure the entire unit with a binder or the like.
4
MIC terminal
Connect an external mic to transmit/record external
sounds. (
➭
page 30)
5
AV connector
Connect a separately purchased AV cord to watch
videos being transmitted/recorded. (
➭
page 31)
6
EXTEND terminal
Not used.
7
DC connector
Connect the supplied AC adapter when using with
AC power. (
➭
page 26)
8
Pan lock (PAN LOCK)
Face the pantilter right in front and slide the knob to
the front side to lock it. Be sure to lock the pantilter
when carrying it.