JVC PC Connection Kit Computer Hardware User Manual


 
40 EN
Editing Method when Using an Editing
Deck other than JLIP
1. Locate the In point using the player
connected to the JLIP and put it in
Playback-Pause mode.
2. Click Edit Standby.
3. Locate the In point of the recorder being
operated by other than JLIP and put it in
Record-Pause mode.
4. Simultaneously press the Playback button
of the player and the Recording Start
button of the recorder.
5. Stop recording once the Out point of the
player has been passed.
Please see the instruction manual for the
recorder for details on how to put a deck into
Recording-Pause mode.
NOTE:
If you need the JLIP Video Producer Help
window, select Help Contents.
JLIP VIDEO PRODUCER WINDOW BUTTONS AND DISPLAYS (cont.)
* Entry button
This button is used to enter the current
counter value for the In point and then Out
point each time it is clicked.
This button is for specifying the In point
and Out point for each scene.
Clicking Entry after clicking a button
other than Bottom of Scene of the
Program Select buttons will add a new
program to the next number after the
current position. The Scene number for
programs beyond the current one are
each increased by one and pushed
toward the back.
This button cannot be clicked when the
counter reads less than 00:00:30:00.
( Program Select buttons
Program selection is also possible by clicking
on a Scene number in the program list.
A. Bottom of Scene button
Clicking this button instantly moves the
selected position in the program list to
the end of the list.
This is useful when there are many
programs.
B. Next Scene button
This button moves the selected position
in the program down by one.
C. Previous Scene button
This button moves the selected position
in the program up by one.
) Scene Number
This displays the currently selected
number in the program list.
A
BC