JVC PC Connection Kit Computer Hardware User Manual


 
48 EN
Modifying the Length of a Scene
1
Select the scene by clicking the Program
Select buttons on the controller.
(You can also select the scene by
clicking on the line of the desired scene.)
2
Click In point or Out point on the
controller and select the time code you
want to modify.
Cutting a scene
1
Click on the scene you want to cut.
2
Select Edit Delete.
•The message "Delete 1 Scene(s)?"
appears.
To cut the scene, click Ye s .
NOTE:
A scene can be deleted by selecting Delete
by clicking with the right mouse button.
BASIC OPERATIONS (cont.)
Correcting program counter data
1
Double click on the line of the scene you
want to modify.
OR . . .
Select the line to be modified and click
Modify Edit Points on the controller.
•The Modify Edit Points dialog box will
appear allowing the In point, Out
point, memo or tape change to be
changed.
2
Click
ᮡᮢ
, or enter the desired numbers
from the keyboard, and then click OK.
NOTES:
The Modify Edit Points dialog box can be
displayed by selecting Modify Edit Points
by clicking with the right mouse button.
Click the Memo field when you want to
enter text in the Memo field.
Correcting and cutting programmed counter data
3
Modify by increasing or decreasing the
time code one frame at a time by
clicking Trim+ or Trim–.
NOTE:
This makes simple modifications convenient
without having to constantly bring up the
Modify Edit Points dialog box.