JVC SA-DV6000 Network Hardware User Manual


 
24
LAN connections Wireless LAN
Set the same domain
Set a unique number to avoid doubling
BR-DV6000
PROFESSIONAL
MENU RESET
A.DUB
EJECT
COUNTER
AUDIO INPUT
SELECT
MONITOROUTPUT REMOTE
LOCAL
CTL L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
(CPN)
TC
UB
REW STOP FF
REC
OPERATE
PLAY PAUSE
DISP
SET SEARCH+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
DHCP OFF
WLAN AD HOC MODE ON
WLAN ESS ID abcdef
WLAN CH 2
IP ADDRESS 192. 168. 100. 101
SUBNET MASK 255. 255. 255. 000
Wireless LAN settings of Client PC
NetworkType 802. 11 Ad Hoc Mode
ESS ID abcdef
Channel 2
Encryption Mode Open System
PROXY SERVER OFF
DHCP SERVER OFF
IP ADDRESS 192. 168. 100. 100
SUBNET MASK 255. 255. 255. 000
* Do not perform encryption of
the wireless LAN.
*For the PC settings when using a LAN card, refer
to the instruction manual included with the LAN
card.
\ Wirelss Connections, Single VTR to Single Client PC
NOTE
Refer to the appropriate manual for setting the PC LAN card
Perform the following settings for the above configuration.
DHCP must be OFF.
VTR and Client PC are set the same domain and different IP addresses.
The Netmask of both the VTR and Client PC must be the same
If the WLAN card in the PC is set to 802. 11 ADHOC, set the WAN AD HOC MODE to IBSS. If the WLAN card in the PC is set to
ADHOC, set the WLAN AD HOC MODE to AHDM.
The WLAN ESS ID on both the SA-DV6000 and the computer must be the same. The VTR default ESS ID is ‘NONE’.
The SA-DV6000 and the computer must be set to use the same channel (WLAN CH).
If WEP data encryption is used, the same key must be used in the SA-DV6000 and the PC. The PC encryption mode must be set to
‘Open System’.
Set the network connection of the Client PC to use no proxy server. Please refer to Page 27. Setting a Proxy Server for information
regarding this setting if troubles are encountered.
25
LAN connections Wireless LAN
DHCP OFF
WLAN AD HOC MODE OFF
WLAN ESS ID abcdef
WLAN CH 2
IP ADDRESS 192. 168. 100. 102
SUBNET MASK 255. 255. 255. 000
DHCP OFF
WLAN AD HOC MODE OFF
WLAN ESS ID abcdef
WLAN CH 2
IP ADDRESS 192. 168. 100. 103
SUBNET MASK 255. 255. 255. 000
DHCP OFF
WLAN AD HOC MODE OFF
WLAN ESS ID abcdef
WLAN CH 2
IP ADDRESS 192. 168. 100. 104
SUBNET MASK 255. 255. 255. 000
IP ADDRESS 192. 168. 100. XXX
SUBNET MASK 255. 255. 255. 000
DHCP OFF
WLAN AD HOC MODE OFF
WLAN ESS ID abcdef
WLAN CH 2
IP ADDRESS 192. 168. 100. 101
SUBNET MASK 255. 255. 255. 000
Wireless LAN settings of Client PC
NetworkType Infrastructure
ESS ID abcdef
Channel 2
Encryption Mode Open System
PROXY SERVER NO USE
DHCP SERVER NO USE
IP ADDRESS 192. 168. 100. 100
SUBNET MASK 255. 255. 255. 000
STATION
ESS ID abcdef
Encryption Mode Open System
BR-DV6000
PROFESSIONAL
MENU RESET
A.DUB
EJECT
COUNTER
AUDIO I NPUT
SELECT
MONITOROUTPUT REMOTE
LOCAL
CTL L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
(CPN)
TC
UB
REW STOP FF
REC
OPERATE
PLAY PAUSE
DISP
SET SEARCH+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
BR-DV6000
PROFESSIONAL
MENU RESET
A.DUB
EJECT
COUNTER
AUDIO INPUT
SELECT
MONITOROUTPUT REMOTE
LOCAL
CTL L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
(CPN)
TC
UB
REW STOP FF
REC
OPERATE
PLAY PAUSE
DISP
SET SEARCH+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
BR-DV6000
PROFESSIONAL
MENU RESET
A.DUB
EJECT
COUNTER
AUDIO I NPUT
SELECT
MONITOROUTPUT REMOTE
LOCAL
CTL L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
(CPN)
TC
UB
REW STOP FF
REC
OPERATE
PLAY PAUSE
DISP
SET SEARCH+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
BR-DV6000
PROFESSIONAL
MENU RESET
A.DUB
EJECT
COUNTER
AUDIO I NPUT
SELECT
MONITOROUTPUT REMOTE
LOCAL
CTL L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
(CPN)
TC
UB
REW STOP FF
REC
OPERATE
PLAY PAUSE
DISP
SET SEARCH+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
Network Type (Ad Hoc/Infrastructure)
Make sure ESS ID and Channel settings
are the same.
Set a unique number to avoid doubling
Set the same domain
* For the PC settings when using a LAN card,
refer to the instruction manual included with
the LAN card.
\ Wireless Connections, Multiple VTR to Single Client PC
NOTE
Refer to the appropriate manual for setting the PC LAN card
Perform the following settings for the above configuration.
DHCP should be OFF
4
.
VTR and Client PC are set the same domain and different IP addresses.
The Netmask of all the VTR and the Client PC must be the same.
The WLAN AD HOC MODE must be set OFF.
The PC WLAN card must be set to Infrastructure mode.
The WLAN ESS ID must be the same in the access point and all VTR. The VTR default ESS ID is ‘NONE’.
The WLAN channel must be the same for the PC, the access point and all VTR.
If WEP data encryption is used, the same key must be used on the PC, the access point, and all VTR. The PC encryption mode must
be set to ‘Open System’.
If the computer is located remotely and accessing the VTR through the Internet, the Infrastructure must allow through access to the
VTR. Consult your IT department.
Set the network connection of the Client PC to use no proxy server. Please refer to Page 27 for information regarding this setting if
troubles are encountered.
4
In case the connecting Client PC is not a server equipped with a DHCP feature.