Kenwood DX-7 Microcassette Recorder User Manual


 
"
-,
u~,
I Display example
When
the
tape
is
stopped
at
the
beginning
When
the
tape
is
stopped at
the
end
r
end
When the beginning
of
the displayed tune
is
reached, "
~
" appears on the display
and playback begins.
If the [PAUSE] button
is
pressed
during the
skip operation, the unit enters
pause
mode
at the beginning of the designated tune.
16
DX-7
To fast-forward
or
rewind
the tape
In
stop mode, press the [FF/CUE] button
to fast-forward the tape and press the
[REW/REVIEWl button to rewind the tape.
Auto Rewind function:
When the last tune
on
the tape finishes
playing, the tape automatically rewinds to
the beginning and then stops.
The same operation occurs even if
an
END-ID
is
recorded.
(See
page 23.)
To skip to a desired tune
(DPSS function)
By
pressing the IFF/CUE]
or
IREW/REVIEW]
button one or more times, you can skip to
a subsequent or previous tune correspond-
ing to the number of presses.
During playback, pressing the [FF/CUE]
button once skips to the beginning
of
the
next tune.
During playback, pressing the [REW/
REVIEW] button once skips to the begin-
ning
of
the current tune.
The unit skips to a designated tune by
searching for the tune's
ST-ID recorded
in
the subcode area. If the ST-ID
is
not
recorded
on
the tape, therefore, skipping
cannot
be
carried out.
If pressed again while the "
~
" indicator
is
blinking, the unit skips to a tune located
even further
in
the skip direction.