Kenwood DX-7 Microcassette Recorder User Manual


 
Digital
recording
First load a tape into the unit (see page
14).
Operation
is
possible with either the main unit or the remote controller.
""
LILI
~II
.-
11.1111
U'LILI
rl
I
ST·ID
mill
LI
I
11.11
-,
ULI
:J
18
DX-7
Connect the unit (See page
11.)
Press
the
[REC]
button.
When starting recording from the begin-
ning of the
tape, the unit automatically cre-
ates a 5-second blank section and then
enters record-standby mode.
Press
the [PLAY/REPEAT] button
to
start
recording.
You can also start recording by pressing
the [PAUSE] button.
To stop recording, refer
to
page 20.
Changing the [VOLUME] level during
recording has no effect on the recorded
sound.
If five seconds elapse after the
[REC]
but-
ton is pressed, the rotating head moves
away from the tape
to
protect the tape.
(The
REC
indicator blinks.)
A ST-ID
is
automatically recorded at the
start of each tune.
(See
page 23.)
When carrying out digital recording from
another DAT deck using a tape recorded
with ST-IDs and SKIP-IDs, the same sub-
codes are recorded on the
new
tape.