Kenwood DX-7 Microcassette Recorder User Manual


 
Cleaning
Cleaning the cabinet
Clean the cabinet by wiping with a dry cloth. If
an
area
is
particularly dirty and cannot
be
cleaned
well with a dry cloth, wipe the area
with
a cloth dampened with water, then wipe dry with a
dry cloth. (Do not use benzene, thinner, or other chemicals.1
Always keep terminals and plugs clean.
Cleaning the head
If the head becomes dirty
or
covered with dust, sound dropouts or noise may occur.
Also, if the head becomes clogged during playback,
"Error"
will appear on the display and the
sound will stop.
In
such cases, clean the head with a commercially available OAT-use head cleaning tape.
Do
not inject oil into the unit. This will damage the unit.
If the head becomes worn after long use, it must
be
replaced. Contact your dealer for the replace-
ment (fee required!,
"Error"
may appear on the display if a wrinkled or damaged tape
is
used or if the head becomes
clogged. If this occurs, replace the tape or try cleaning the head
with
a cleaning tape.
If this unit
is
subjected
to
a strong external disturbance (such
as
a shock or abnormal voltagel
or misoperation, the unit may stop responding
to
button operations or operate abnormally.
In
such a case, disconnect the
AC
adaptor plug,
wait
about
30
seconds, reconnect the plug,
then retry the operation.
Accessories
(1) Remote controller
(3) Digital connection Cord
(5) Digital-use adaptor plug
(2)
AC
adaptor
(4) Analog connection cord
(6)
Plug
adaptor (Except for USA,
Ca'nada
and
UK)
DX-7
27