Kenwood NX-800 Scanner User Manual


 
All accessories and options may not be available in all markets.
Contact our authorized dealer for details and complete list of all accessories and options.
Options
Main Specifications
KMC-30
Microphone
KMC-32
Microphone
with Keypad
KMC-35
Microphone
KMC-36
Microphone
with Keypad
KMC-9C
Control Station
Desktop Microphone
KES-5
External Speaker
KRK-10
Panel Remote Kit
KAP-2
Horn Alert
/ PA Relay Unit
KCT-46
Ignition Sense Cable
KCT-23M
DC Cable (3 m)
KCT-23M3
DC Cable (7 m)
KLF-2
Line Noise Filter
VGS-1
Voice Guide
and Storage Unit
KDI-03
DIN-size
Mounting Bracket
KMB-10
Key Lock Adaptor
KCT-23M3
CL739E-E-2
Analogue measurements made per EN Standards or TIA/EIA 603 and specifications shown are typical.
Specifications are subject to change without notice, due to advancements in technology.
FleetSync
®
is a registered trademark of JVC KENWOOD Corporation.
LTR
®
is a registered trademark of Transcrypt International.
AMBE+2
TM
is a trademark of Digital Voice Systems Inc.
Windows
®
is a registered trademark of Microsoft Corporation.
NXDN
®
is a registered trademark of JVC KENWOOD Corporation and Icom Inc.
NEXEDGE
®
is a registered trademark of JVC KENWOOD Corporation.
www.kenwood-electronics.co.uk
http://nexedge.kenwood.com
MIL Standard MIL 810C MIL 810D MIL 810E MIL 810F MIL 810G
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II 500.5/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II 501.5/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II 502.5/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II 503.5/Procedure I
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I 505.5/Procedure I
Rain 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III 506.5/Procedure I, III
Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4 507.5/Procedure II
Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4 509.5
Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III 510.5/Procedure I
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I 514.6/Procedure I
Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV , V 516.5/Procedure I, IV, V 516.6/Procedure I, IV, V
International Protection Standard
Dust & Water Protection
IP54: Radio itself
IP54/55: Remote head with KRK-10
Applicable MIL-STD & IP
NX-700 NX-800
RECEIVER
Sensitivity (Analogue)
EIA 12dB SINAD 0.25 µV
EN 20dB SINAD
-3 dB µV
(0.35 µV)
Sensitivity (Digital)
3% BER 0.28 µV / 0.20 µV
(12.5 kHz / 6.25 kHz)
1% BER
-2 dB µV
(0.40 µV)
/ -5 dB µV
(0.28 µV)
Adjacent Channel Selectivity (Analogue)
(25kHz / 20kHz /12.5kHz) 80 dB / 78 dB / 70 dB 78 dB / 76 dB / 68 dB
Intermodulation (Analogue)
70 dB
Spurious Response Rejection (Analogue)
80 dB
Audio Distortion Less than 3%
Audio Output 4 W / 4
Ω
TRANSMITTER
RF Power Output 1 - 25 W
Modulation Limiting (Analogue) ± 5.0 kHz at 25 kHz
± 4.0 kHz at 20 kHz
± 2.5 kHz at 12.5 kHz
Spurious Emission -36 dBm
1 GHz, -30 dBm > 1 GHz
FM Noise (EIA)
(Analogue, 25kHz / 20kHz /12.5kHz)
50 dB / 50 dB / 45 dB
Modulation Distortion Less than 3%
Modulation 16K0F3E, 14K0F3E, 14K0F2D, 12K0F2D,
8K50F3E, 7K50F2D, 8K30F1E, 8K30F1D,
8K30F7W, 4K00F1E, 4K00F1D, 4K00F7W,
4K00F2D
NX-700 NX-800
GENERAL
Frequency Range 136-174 MHz 400-470 MHz
Number of Channels 512
Zones 128
Max. Channels per Zone 250
Channel Spacing Analogue 12.5 / 20 / 25 kHz
Digital 6.25 / 12.5 kHz
Operating Voltage 13.2 V DC (10.8 - 15.6 V DC)
Operating Temperature Range
- 30°C to + 60°C
Frequency Stability ± 1.7 ppm ± 1.0 ppm
Antenna Impedance 50
Ω
Dimensions (W x H x D)
Projections not included
160 x 45 x 157 mm
Weight (net) 1.38 kg
Applicable Standards ETSI R&TTE EN 300 086, EN 300 113, EN 300 219,
EN 301 489, EN 301 166
ETSI Safety EN 60065, EN 60950-1, EN 60215