Filter
Top Products
Additional Calibration Information
September 2000 C-17
The Send LUT to Printer dialog box appears.
3. Select one of the LUTs from the dialog box and click Load Selected LUT or
click Load Custom LUT and follow the prompts to load a custom LUT. The
LUT is downloaded to the printer, overwriting the current LUT.
Sending Targets
The Send Target feature enables you to send any properly formatted target file to
the printer without performing a calibration. The target file must contain image
data in the format for the Kodak Professional LED II Printer 20P/20R. The format
of this file must be raw RGB pixel interleaved.
To send a test target to the printer:
1. From the KODAK Device Calibration screen, double-click the device for which
you want to send a test target.