Kodak 20R Printer User Manual


 
September 2000 4-1
4 Maintaining the Equipment
This chapter includes information you will need to maintain the KODAK
PROFESSIONAL LED II Printer 20R. The topics are as follows:
Maintaining the Printer .......................................................................................4-1
Daily Maintenance .......................................................................................4-1
Calibrating the Printer ...........................................................................4-1
Removing the Punch Chad ...................................................................4-2
Periodic Maintenance ..................................................................................4-3
Replacing the Air Filter .........................................................................4-3
Maintaining the Printer
Daily Maintenance
Calibrating the Printer
Calibrate the printer after every 8 to 10 hours of operation or when you change
paper emulsions.
NOTE: If the environmental temperature changes more than 5
o
Fahrenheit
(3
o
Celsius) since the printer was last calibrated, a calibration will be
necessary to maintain the image quality of the prints.
Follow the instructions for calibrating the printer (see Calibrating the Printer on
page 2-2).