Kodak 2100 All in One Printer User Manual


 
Maintaining Your Printer
82 www.kodak.com/go/aiosupport
Updating the software and printer firmware
Using the latest software and firmware helps ensure optimal performance of your
printer.
NOTE: Firmware is the software that runs on your printer.
Although there is a background check for software and firmware updates, you may
update manually using the following procedure.
Updating manually if your printer is connected to a computer with WINDOWS OS
To update the software:
1. Make sure that your computer is connected to the Internet.
2. Select Start > All Programs > Kodak > Kodak AiO Printer Tools.
3. Under Printer Resources, click Check for Software Updates to check whether
software updates are available.
4. If there are updates, click Next and follow the on-screen instructions.
To update the firmware:
1. Make sure that your computer is connected to the Internet.
2. Connect the printer to the computer with a USB cable or wirelessly (if not
currently connected).
3. Select Start > All Programs > Kodak > Kodak AiO Printer Tools.
4. Make sure that
KodakESP2150+xxxx - Connected (or a similar name with
Connected) appears in the lower left corner of the Printer Tools window.
NOTE: If
KodakESP2150+xxxx - Connected does not appear in the lower left corner,
click
Select, then click Refresh List and choose your printer from the list; click
Install KODAK Printer and follow the on-screen instructions.
5. Under Printer Resources, click Check for Printer (Firmware) Updates.
6. If there are updates, click Next and follow the on-screen instructions.
IMPORTANT: Do not turn off or unplug your printer or your computer during the update.
Doing so may cause the printer to become inoperable. If the printer is
connected wirelessly, make sure you have a stable connection when you
perform the update.