Kodak 2.2 All in One Printer User Manual


 
7. Insert the ink cartridge into the printhead.
8. Press down on the ink cartridge tab until you hear a click.
9. Close the access door.
Replacing the printhead
:
Replacing the printhead is not a regular maintenance procedure. Replace the printhead only if you receive a new
printhead from Kodak.
Click to view a video that demonstrates replacing the printhead.
To replace the printhead:
1. Make sure the printer is on.
2. Lift the access door, and wait for the carriage to move to the access position.
KODAK HERO 2.2 All-in-One Printer
www.kodak.com/go/aiosupport 73