Kodak 3.2 All in One Printer User Manual


 
Maintaining Your Printer
100 www.kodak.com/go/aiosupport
Updating if your printer is connected to a computer with MAC OS
To update the software:
1. Make sure that your computer is connected to the Internet.
2. Open Home Center Software.
3. Select the To o l s tab.
4. Click Check for Software Updates.
5. If there are updates, follow the on-screen instructions.
To up da te th e f ir mware :
1. Make sure that your computer is connected to the Internet.
2. Connect the printer to the computer with a USB cable or wirelessly (if not
currently connected).
3. Open Home Center Software.
4. Select the To o l s tab.
5. Click Check for Printer (Firmware) Updates.
6. If there are updates, follow the on-screen instructions.
IMPORTANT: Do not turn off or unplug your printer or your computer during the update.
Doing so may cause the printer to become inoperable. Your printer will
restart during the upgrade.
Checking ink levels
1. Press .
2. Touch , then
Maintenance.
3. With
Check Ink Levels selected, press.
The LCD shows approximate levels of ink in the cartridges so you know when it’s
time to order replacement cartridges.
NOTE: You can order ink cartridges online. Go to
www.kodak.com/go/printingsupplies.
Resetting factory defaults
1. Press .
2. Touch , then
Printer Settings.
3. Touch , then
Reset All Settings.
4. When you see the message, “This will reset printer settings to factory defaults.
Continue?,” touch
Ye s .
NOTE: Resetting factory defaults does not change the date and time, language,
country/region, or network settings.